Sanding a floor can be a time–consuming task, but the results are worth it. Depending on the size of the floor and the type of sandpaper you are using, it can take anywhere from a few hours to a few days to sand a floor properly. Make sure to take your time and be careful not to damage the flooring further.
Are Floorboards Worth Sanding?
The decision to sand wooden floorboards is a complex one, as there are a number of factors to consider. The age and condition of the floorboards, the type of wood, the finishes used, and the level of wear and tear all need to be taken into account.
In general, if the floorboards are in good condition and have a natural finish, they may not need to be sanded. However, if they are older and have a finish that is no longer in good condition, sanding may be necessary in order to restore them.
If the floorboards are in poor condition, they may need to be sanded down to the bare wood before a new finish can be applied. In some cases, this may also be necessary if the floorboards are very old and have developed a lot of character.
It is important to note that sanding floorboards can be a time-consuming and labour-intensive process, so it is not always worth it, especially if the floorboards are in good condition.
What is the Best Way To Sand Hardwood Floors?
There are a few ways to go about sanding your hardwood floors, and the best way to do it will depend on the condition of your floors, the type of sandpaper you are using, and your own personal preferences.
One way to sand your floors is to use a drum sander. This is a large piece of equipment that attaches to an electric drill, and it will allow you to quickly sand large areas of your floors. However, if your floors are in poor condition, a drum sander may be too aggressive and could damage them.
Another option is to use a floor buffer. This is a smaller piece of equipment that is more maneuverable than a drum sander, and it can be used to sand smaller areas of your floors. Floor buffers can also be used to polish your floors after they have been sanded.
The type of sandpaper you use will also affect how you sand your floors. There are three main types of sandpaper: coarse, medium, and fine. Coarse sandpaper is best for removing the old finish from your floors, while medium and fine sandpaper can be used to smooth them out.
Finally, you need to decide what type of finish you want on your floors. There are a variety of finishes available, such as polyurethane, wax, and oil. Choose the finish that best suits your needs and preferences.
No matter what method you choose, always be sure to follow the manufacturer’s instructions closely. Failure to do so could result in damage to your floors.
So, How Many Hours Does It Take To Sand Hardwood Floors?
Sanding hardwood floors is a time-consuming process, but the results are worth it. Depending on the condition of your floors and the type of sandpaper you use, it can take anywhere from two to four hours to sand each square foot of flooring.
If you’re starting with a new floor, you’ll need to sand off the finish and rough up the surface so the sealant or paint will adhere. If your floor is in good condition, you can just sand off the old finish and sealant.
To sand a floor, you’ll need a belt sander, a handheld block sander, and some 80-grit sandpaper. Begin by sanding in one direction with the belt sander, then switch to the block sander and sand in the other direction. Be sure to overlap your strokes as you go to make sure the entire surface is covered.
After you’ve sanded the entire floor, go over it again with a finer grit sandpaper, such as 120 or 150. This will give your floor a smooth, polished finish.
The amount of time it takes to sand a floor can vary depending on the condition of the floor, the type of sandpaper you’re using, and your own speed and accuracy. But, in general, you can expect to spend two to four hours sanding each square foot of flooring.
Back to top: How Long Does It Take To Sand Hardwood Floors?